One Park Drive, Wood Wharf

PERI Products

You can view the full range of PERI products below.

All Products

Use the filter function below to find the product you're looking for and its application.

VT 20
Formwork carriage used on the steel substructure for the construction of carriageway slabs
The lightweight for new construction and refurbishment projects
The system consists of different types of load and length optimized frames, which enable to continuously create every span with the corresponding combination.
Shoring system for very large loads in bridge constructions as well as for special applications in industrial construction
The movable, anchor-free solutions for bridge infrastructure. Perfect for bridges over 150m long.
The fast, rentable solution with the best handling and reduced material quantities
The mobile solution installed below for bridges over 150 m long
Scaffold-free cantilever formwork for steel composite and precast concrete bridges
A computer screen showing reading from a concrete pressure sensor. A yellow handheld hub is connected to the sensor.
Concrete Temperature and Maturity Monitoring
Powder coated
Reduced cutting and working of materials on site
Low safety risks – simple tools and low weights
Available in different configurations
Fix – for frequent use with common dimensions, available in wall sizes 20, 24 and 25cm
Speed Edge Formwork is an innovative solution that is made from sheet steel for the installation of permanent lateral formwork for reinforced concrete base.
The simplest way to achieve continuity of reinforcement between pours.
TRIO is a universal formwork system which places the highest emphasis on uncomplicated forming operations and the reduction of shuttering times.
A picture showcasing PERI's MAXIMO wall formwork, an effective system for constructing walls.
The universal lightweight formwork for walls, columns and slabs
Lightweight panel formwork for building construction and civil engineering
Continuously adjustable circular formwork for radii greater than 1.00m without panel alterations
SB Stützbock: Zuverlässiges Betonieren von einhäuptigen Wänden bis 8,75 m Höhe.
Economical forming without ties, for all radii, also with special formwork
The drive rails are available in two variants, depending on the type of project at hand: RCS MAX C and CL. Both allow the platforms to be moved safely in 750 mm increments.
Flexible girder wall formwork, also for high-grade architectural concrete surfaces.
SKYDECK Finply Panel Slab Formwork: The lightweight and proven aluminium panel slab formwork with short shuttering times.
The flexible and adjustable slab formwork with VT 20K or GT 24 Formwork Girder
Perfect concrete surfaces for highly demanding requirements without any nail or screw impressions
TRIO Column Formwork: Elements for walls and columns, cross-sections up to 75 cm x 75 cm
All heights, all cross-sections, regardless whether square or rectangular-shaped
The column formwork which can be moved as a complete unit
RCS Rail Climbing System: The universal modular system for a wide range of applications
With PERI SCS, the loads from the fresh concrete pressure are transferred without formwork ties through the brackets into the climbing anchors of the previous concreting section.
The Self-Climbing System ACS-R with the one-sided reinforcement scaffold in advance.
The CB climbing system provides safe working conditions with wall formwork at all heights.
FB 180 Folding Platform System: The universal working and safety scaffold.
LPS Screen - The lightweight climbing protection panel
HR Render image of the PERI VTC Tunnel Carriage
Supporting structures cost-effectively erected with system – with materials and expertise from a single source
VARIOKIT Heavy-duty shoring: Either the Heavy-Duty Tower as the Truss Girder are adjustable to the correct height and length.
Construction of superstructures using the balanced cantilever method – fast and dimensionally-accurate
VARIOKIT Cantilevered parapet system: A safe and clean solution for short bridges and redevelopment.
VARIOKIT Composite bridge system: The formwork carriage, which consists of rentable standard material, is optimally adapted to the geometrical and static boundary conditions and therefore provides a very cost-effective solution.
Precision-made for an individual design
PERI Clean, PERI Bio Clean and PERI Plasto Clean - Concrete release agent for all formwork and equipment
PERI tie systems: The DK and SK tie systems serve to ensure subsequent, reliable sealing of tie points.
The cost-effective solid web girder
Increase safety and productivity with the XL hoist, designed and operated by XL Industries in collaboration with PERI UK.
RS Push-Pull Props: A complete programme, can be telescoped to reach a length of 14.00 m
Temporary edge protection for your projects.
GT 24 Schalungsträger: The versatile lattice girder with high load-bearing capacity
With the ISC SONO WZ Analyser, the water content of fresh concrete can be quickly and precisely determined on site.
MULTIPROP Aluminium Slab Props: Used as a cost-saving lightweight individual prop and cost-effective shoring tower
The latest addition to the PERI UP scaffolding toolkit, PERI UP Easy is designed to improve both safety and productivity for façade applications.
PERI UP Flex Modular Working Scaffold: Extremely flexible work scaffold for a wide range of applications.
Extremely adaptable and with a high load-bearing capacity
The lightweight stair tower for flexible access solutions
PERI UP Flex Stair Steel 100,125: For high requirements regarding load bearing capacity and accessibility.
Scaffolding transportation system
The PERI UP Loading Bay in a standard arrangement can be loaded up to 10kN/m²
The suspended scaffold can be manoeuvred with little effort due to smooth plastic rollers.
PERI UP Flex Reinforcement R75,100: Modular Reinforcement Scaffold for efficient work.
PERI UP Flex Weather Protection Roof: Standard components are the basis for variable roof shapes.
PERI UP Flex Shoring: The maximum level of flexibility.
The heavy-duty prop with integrated load control
HD
The tubular steel prop for daily use on construction sites
The galvanized tubular steel slab prop with up to 50 kN load-bearing capacity
For the forming of monolithic concrete up-stands in slabs
CEMflex is the most tested solution for waterproofing concrete structures and can be easily fit into place with a clip.
The permanent stop end system for the installation of construction joints.
Softwood Plywood for use in multiple applications
Ultraform
Tulsaform
Medium Density Overlay (MDO) Plywood for various formwork applications, giving a smooth matt finish
Wisaform MDO
Coated import plywood for loose formwork purposes from PERI
PERI plywood for universal applications, i.e. as a protective plate
PERI FinPly Filmfaced plywood for smooth fairfaced concrete requirements
FinPly Maxi from PERI is a large panel for concrete formwork applications
PERI panel used as facing plywood on continuous support
PERI's traditional shuttering panel
Multi use Plywood with improved durability
Oriented Strand Board for use in multiple structural applications
Medium Density Fibreboard (MDF) is an engineered wood-based sheet material made by bonding together wood fibres with a synthetic resin adhesive.
High quality and robust, choose PERI UK for your Flooring Grade Plywood.
Durable, high-density moisture-resistant P5 grade chipboard flooring. Tongue and groove design for easy installation
PERI wiremesh-plywood with Non-skid filmfaced coating for applications with antiskid requirements
PERI pave production pallet for the paving industry.
Visualization plays an increasing role in all stages of the construction process. The communication, safety and efficiency of many processes benefit from detailed virtual models.
The Tekla Components are a complete library of PERI’s most successful formwork systems
Plan your build easily.
The CAD program for professional work preparation
An image of a laptop, tablet, phone and computer screen displaying the appearance of the myPERI app.
App icon PERI Formwork Load Calculator
Track your construction materials.
App icon PERI MULTIFLEX Girder-Slab Formwork Configurator App
App icon PERI ST 100 Stacking Tower Configurator
VGK Design Tool
BIM Software Image
General overhaul for your formwork